Less Than 0.1% Loss. Guaranteed
Most jewellery manufacturers accept metal loss as “normal” because nobody measures it properly. But when loss drops from 0.5% to 0.1%, the savings run into lakhs every year. This article explains why most master alloys can’t guarantee loss and introduces the only 18KT red gold master alloy that puts a number on it.
.jpg)
The only 18KT red gold master alloy that puts a number on it
We supply master alloys to jewellery manufacturers across India. So we hear the same frustration everywhere sometimes in yield meetings, sometimes mentioned quietly when discussing why margins are tight.
One number keeps coming up. And it's the number nobody can pin down.
Metal loss.
📉 THE LOSS NOBODY MEASURES PROPERLY
A casting supervisor in Mumbai told me: "Thoda loss toh hota hi hai. Yeh toh normal hai."
When I asked him the actual percentage, he couldn't say. Because nobody measures it properly. It just gets absorbed into the system as "normal waste."
But here's what "normal" actually costs:
DAILY MELT 0.5% LOSS 0.1% LOSS
100g gold ₹3,750/day ₹750/day
Per year (250 days) ₹9,37,500 ₹1,87,500
That's ₹7.5 lakhs difference per year. From just 100 grams daily. Scale up, and the numbers get serious.
🤔 WHY MOST SUPPLIERS WON'T GIVE YOU A NUMBER
Ask your current alloy supplier: "What loss percentage can you guarantee?"
Most will say: "Depends on your process." Or: "Results vary." Or simply: nothing.
Because they can't. Their alloy wasn't formulated with loss as the primary design target. It was designed for colour, or hardness, or price and loss is just whatever happens.
We take a different approach.
✨ BH102RU: THE GUARANTEE
.jpg)
BH102RU is an 18KT red gold master alloy from Legor (Italy), formulated with one primary target:
LESS THAN 0.1% METAL LOSS — GUARANTEED
Not "up to." Not "typical." Not "in ideal conditions." Guaranteed.
How? The formulation specifically addresses loss mechanisms:
✓ No oxidation during melting or working — the primary cause of loss, eliminated at source.
✓ 15°C melting window (905-920°C) — wider than competitors' 6°C range. Less chance of overheating.
✓ Clean melt, minimal scale — what goes in comes out, not stuck to the crucible.
✓ Formulated for repeated remelting — loss stays below 0.1% even after multiple cycles.
📦 WHAT ELSE YOU GET
Low loss isn't the only benefit. The same formulation delivers:
• 5% silver content — anti-tarnish, colour stability in showroom.
• 531 MPa tensile strength — 21% stronger than typical alloys. No cracking.
• 60 μm grain size — very high refinement. Smooth finish, less polishing.
• Consistent red colour — wahi shade, batch after batch.
• Multi-process capability — casting, CNC, chains, wire, sheet, stamping. One alloy.
⚠️ WHAT THIS WON'T FIX
I'll be honest better alloy doesn't fix broken process.
If your crucible maintenance is poor, you'll have issues. If your temperature control is wildly inconsistent, results will vary. If your workflow creates unnecessary remelting, even low-loss alloy loses more than it should.
Par agar aapka process already solid hai then BH102RU gives you a measurable, guaranteed improvement. And we stand behind that number.
💬 WANT TO PUT A NUMBER ON YOUR LOSS?
If you're tired of "thoda loss" without knowing the actual figure, let's talk. We'll help you measure your current loss, compare against the guarantee, and do the maths together.
Reach out: help@preciousalloy.com | +91 22 6101 4444
Advancements in Electroplating Technology for Luxury Accessories
How new plating techniques are enabling unprecedented finishes and durability in high-end consumer products.
All blog posts
.jpg)
.jpg)
.jpg)
FAQs
We’ve answered the big questions, but if you still have something on your mind, we’re here to help.
What does Precious Alloys Pvt. Ltd. specialize in?
Precious Alloys Pvt. Ltd. is a B2B solutions provider specializing in advanced casting machines, in-house alloy manufacturing, Legor’s plating solutions, Invicon investment rings, and platinum casting technologies.
Who are the typical clients of Precious Alloys Pvt. Ltd.?
We serve jewelry manufacturers, industrial casting units, precision engineers, and large-scale refineries looking for reliable, high-performance casting and alloying solutions.
Where are your services available?
We are available in most Tier 1 and Tier 2 cities across PAN India. Whether you're in metro hubs or emerging regional centers, our team ensures efficient service with consistent quality and support.
Where is Precious Alloys located, and do you serve clients across India?
Our head officeis located in Mumbai, and we serve clients nationwide through a strong regionalnetwork. We also support international inquiries about select offerings.Wherever you're based, we’re equipped to deliver.
What kind of technical or after-sales support do you offer?
We provide end-to-end technical support—from product selection and process setup to troubleshooting and training. Our regional experts ensure timely assistance to keep your operations running smoothly.
What industries does Precious Alloys serve?
Precious Alloys primarily serves the jewelry manufacturing industry, supporting processes like casting, plating, and alloy development. We also cater to exporters, OEMs, and businesses in high-precision metalwork requiring specialized materials and equipment.
What makes Precious Alloys different from other suppliers in the industry?
We offer in-house manufacturing, faster delivery, consistent quality, and expert support—combining global standards with local reliability.
Can you customize alloy formulations for specific client needs?
Absolutely. Our metallurgical team collaborates closely with clients to develop custom alloys based on color, hardness, melting point, and other application-specific requirements.
What kind of training or support do you offer post-sale?
We offer on-site installation, operator training, process optimization, and ongoing technical support to ensure you get the best performance and ROI from our machines and materials.
How do Precious Alloys help manufacturers improve production efficiency?
We integrate casting machines, optimized alloys, and plating solutions into a seamless workflow, reducing metal loss, cycle times, and rework—leading to higher throughput and consistent product quality.
